The so-called burnout state of tapered roller bearings refers to the gathering heat or discoloration, softening, melting and damage of the raceway wheel, rolling element and cage of tapered roller bearings in the process of rotation. The main cause of burnout of Xuzhou SKF tapered roller bearing is that the lubrication of bearing is not ***ooth. Irregular lubricant (function: C) can be used to reduce or ***oid friction, wear or lubrication. It's wrong to slip too much. By touching the steel stamp on the bearing, the bearing can be recognized more quickly and accurately. If you touch it with your hand, the stamp won't touch it, but you can touch it gently with a nail. Xuzhou SKF bearing has higher rated load and lower noise, which greatly reduces the maintenance cost and prolongs the running time of the machine.
Secondly, it may be overloaded, too fast, too ***all gap, water inflow or other foreign body intrusion. When the bearing distinguishes between true and false, the bearing can be distinguished faster and more accurately by touching the mark on the bearing. If you touch the stamp with your hand, it has no contact. But if you touch the stamp with your nails, you can feel the existence of the stamp. If the above two kinds of Xuzhou SKF bearings are inc***istent, it shows that the accuracy of the shaft and the bearing box is not good, and the deflection of the shaft is large. So what is the solution? First, lubricants and lubrication methods should be studied. Selection of bearing lubricant (function: can reduce or ***oid friction and wear), and its dosage, and can correctly select tapered roller bearings. Through clearance and pre-tightening of bearings, the accuracy of sealing device, inspection shaft and bearing box is improved. It is suggested that when using tapered roller bearings, attention should be paid to the accuracy and position, lubrication and clearance of Xuzhou SKF bearings.
Recently, an automobile bridge company in Ningbo found a manufacturer of tapered roller bearings online. By browsing this website, the company is c***idered to be a large enterprise with complete operation and control equipment. They call and communicate with company leaders. After answering customers'questi*** carefully and patiently, customers' friends are both confident and satisfied with the products. Then one-time purchase of tapered roller bearings, a total of more than 800 sets. Through investigation, Xuzhou SKF bearing has good effect and satisfied customers. After purchasing tapered roller bearings, we will find tapered roller bearings! Good quality, low price and high cost performance are the unanimous evaluation of our customers and friends.